Handling sheets
Loading Sheets in the Printer .......................................................................................................................... 802
Printing From a Desired Starting Point ............................................................................................................ 806
Removing Sheets ............................................................................................................................................ 810
Loading Sheets in the Printer
Follow these steps to load sheets in the printer.
Note
• Loading sheets when a roll is already loaded in the printer may cause jams. We recommend removing rolls
before loading sheets. (See "Removing the Roll from the Printer.") →P.786
To prevent the roll from unwinding if you leave it loaded, wrap a sheet of paper around the roll and tape it.
• Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If
these areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.")
→P.1026
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
• Load the paper straight. Loading paper askew will cause an error.
1. Select sheets as the paper source.
•
If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on the Dis-
play Screen.
Press ▲ or ▼ to select Load Paper, and then press the OK button.
Handling Paper
>
Handling sheets
>
Loading Sheets in the Printer iPF8300
7
802
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
