Canon ipf8300 - Mediatype Mismatch; Messages Regarding Paper

MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in the
printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
2. Replace the loaded paper with paper of the type and size you have speci-
fied in the printer driver.
The printer will resume printing.
(See "Loading and Printing on Rolls.")
→P.3
(See "Loading and Printing on Sheets.") →P.6
Follow these steps to ensure the paper type matches on the printer and in the
printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the loaded paper with paper of the type and size you have speci-
fied in the printer driver.
The printer will resume printing.
(See "Loading and Printing on Rolls.") →P.3
(See "Loading and Printing on Sheets.") →P.6
Follow these steps to ensure the paper type matches on the printer and in the
printer driver.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Either change the type of paper specified in the printer driver settings or
replace the loaded paper and change the paper type setting on the printer.
(See "Loading and Printing on Rolls.")
→P.3
(See "Loading and Printing on Sheets.")
→P.6
Press ▲ or ▼ to select Print, and then press the OK button to resume print-
ing.
However, note that this error may cause paper jams and affect the printing
quality.
You tried to print a test pattern for
printer adjustment on several sheets,
but sheets of different types of paper
were used.
When printing a test pattern for adjustment, use sheets of the same type of
paper, in the required quantity. Replace the paper as follows and perform ad-
justment again.
1. Lift the Release Lever and stop printing.
2. Replace the paper.
(See "Loading and Printing on Sheets.") →P.6
3. Execute adjustment again from the control panel menu.
When Detect Mismatch in the Control
Panel menu is set to Warning, the
type of paper loaded does not match
the type specified in the printer driver.
You can continue to print, but note that this error may cause problems in the
printing results.
Error Message > Messages regarding paper >
MediaType Mismatch iPF8300
13
1082
Downloaded from ManualsPrinter.com Manuals