Back
a.
Carrying Handles
When carrying the printer, have four people hold it by these handles under both sides.
b.
Media Take-up Unit Power Inlet
Connect the power cord of the optional Media Take-up Unit here.
c.
Ethernet Port
Connect an Ethernet cable to this port. The lamp is lit if the Ethernet cable is connected correctly and communication is
possible between the computer and printer.
d.
USB Port
Connect a USB cable to this port. This port is compatible with USB 2.0 High Speed mode.
Printer Parts
>
Printer parts
>
iPF8300 Back
9
883
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
