Canon ipf8300 - Printing Does Not Start; The Data Reception Lamp on the Control Panel Does Not Light up; The Printer Does Not Respond Even if Print Jobs Are Sent; Ink Filling.. Is Displayed

Printing does not start
The Data Reception Lamp on the Control Panel does not light up ............................................................... 1054
The printer does not respond even if print jobs are sent ............................................................................... 1054
Ink Filling.. is displayed .................................................................................................................................. 1054
The display screen indicates Agitating ......................................................................................................... 1055
The Data Reception Lamp on the Control Panel does not light up
Cause Corrective Action
The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power
button to turn on the printer.
The printer is not selected in the
printer driver. (The printer is in
Sleep mode.)
In Windows, select the printer by clicking Select Printer or Printer in the print-
ing dialog box and try printing again.
In Mac OS X, select the printer by clicking Printer Setup Utility (or Print Cen-
ter ) and try printing again.
The print job is paused. (The print-
er is in Sleep mode.)
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers ) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility in some ver-
sions of Mac OS X.)
2. Select the printer, and then Start Jobs in the Printers menu to restart the print
job.
The printer does not respond even if print jobs are sent
Cause Corrective Action
In the Control Panel menu, Pause Print is
On.
Set Pause Print to Off.
(See "Pausing Printing.") →P.16
You have selected Save in mail box in
Output Method on the printer.
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.") →P.725
Print jobs are pending. Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
→P.722
Ink Filling.. is displayed
Cause
Corrective Action
The printer was forced off during oper-
ation.
Wait until the system has been filled with ink. This process may take about
nine minutes.
Troubleshooting > Printing does not start >
The Data Reception Lamp on the Control Panel does not light up iPF8300
12
1054
Downloaded from ManualsPrinter.com Manuals