Canon ipf8300 - Job Management Using Imageprograf Status Monitor

Pausing/Resuming Print Jobs
Selecting a print job and clicking the Pause button pauses printing of the selected job.
To resume printing of a paused print job, select the print job and click the Resume button.
Note
• Once all the print data for a print job has been sent to the printer, the job can no longer be paused/resumed.
Canceling Print Jobs
Selecting a print job and clicking the Cancel Job button cancels printing of the selected job.
Note
• You cannot cancel other users' print jobs.
Printing Held Jobs
Printing of the job with a Status of Holding is paused because the paper specified by the driver does not match the paper
currently loaded in the printer.
Use the procedure below to print the held job.
1. Select the held job and click the Replace Paper button.
2. Replace the paper in the printer with the correct paper.
Note
• To continue printing without changing the paper in the printer, select the held job and click Continue to
print button.
• The printing behavior when the paper specified by the driver does not match the paper currently loaded in the
printer can be changed by using Detect Mismatch in the operation panel menu. Refer to Menu Set-
tings →P.912 for details.
Windows Software > Status Monitor >
iPF8300 Job Management Using imagePROGRAF Status Monitor
4
421
Downloaded from ManualsPrinter.com Manuals