14. Close the Top Cover.
Ink now fills the system. It takes about 13 minutes for ink to fill the system.
Important
• Never remove an Ink Tank or Maintenance Cartridge while the system is filling with ink.
Note
• The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
If so, execute Head Posi. Adj. > Auto(Advanced) in the Control Panel menu.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.839
15. Follow the instructions on the Display Screen and supply paper that you will use for printing. After the paper is
advanced, Head Posi. Adj. will be executed automatically.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).") →P.839
Note
• When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper,
set the optimal Printhead height before aligning the printhead.
(See "Enhancing Printing Quality.") →P.837
Maintenance
>
Printheads
>
Replacing the Printhead iPF8300
11
1010
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
