Note
• Before borderless printing, make sure the blue Switch on the platen is set toward the ● side. (See
"Setting the Blue Switch on the Platen.") →P.1063
4. Select the type of paper. (See "Changing the Type of Paper.") →P.784
Note
• If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the
roll length after the type of paper. (See "Specifying the Paper Length.") →P.785
Basic Printing Workflow
>
Printing procedure
>
iPF8300 Loading and Printing on Rolls
1
5
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
