Adjusting Monochrome
Use the monochrome setting to print monochrome images of color photographs captured with a scanner or digital camera or
other color images.
1. Select Monochrome on Color Mode in the Color Settings panel.
2. Select Color Adjustment.
3. Drag each slider to the left or right to adjust.
Setting Details
Brightness Adjusts the brightness of the entire image. When the results of the printout are
brighter than the original images such as the original photo before scanning and
graphics created on the display, or when you want to print in different degrees of
brightness, use this feature.
Contrast Adjusts the relative brightness between the brightest and darkest portions of the
image.
*For soft gradation, decrease the contrast. For hard gradation, increase the con-
trast.
Note
• You can also click the up or down arrow, or enter the number directly to increase or decrease the
value.
Mac OS X Software
>
Free Layout
>
iPF8300 Color Adjustment
5
555
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
