7. Holding the Roll Holder flange (a), remove the holder from the Roll Holder Slot.
Note
• For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from
Rolls." →P.789
8. Lower the Ejection Guide and close the Top Cover.
Note
• To load new paper in the printer at this point, see "Loading Rolls in the Printer." →P.777
• Clean inside the top cover before loading paper.
(See "Cleaning Inside the Top Cover.") →P.1026
Handling Paper
>
Handling rolls
>
Removing the Roll from the Printer iPF8300
7
788
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
