Canon ipf8300 - Page 967

• Windows 7
• Windows Vista x64
• Windows Server 2008 x64
• Windows 7 x64
• Mac OS X 10.3.9 or later
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, see
"Configuring TCP/IPv6 Network Settings." →P.954 or see "Configuring the Printer's TCP/IP Net-
work Settings." →P.956
• The imagePROGRAF printer driver is supported in Mac OS X 10.3.9 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
•
Printing over an AppleTalk network
• Compatible operating systems
• Mac OS X 10.2.8–10.4
• Compatible computer
• A computer that runs one of the above operating systems
Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
•
Printing over a NetWare network
• Compatible servers
• Novell NetWare 4.2/5.1/6.0
• Compatible clients
• Windows 2000 (Professional or Server)
• Windows XP (Professional)
• Compatible computer
• A computer that runs one of the above operating systems
Note
• In NetWare 6.0, iPrint is not supported.
Network Environment
After confirming what type of network environment you will connect the printer to, set up the printer and computers as
needed.
Network Setting
> Network Setting >
iPF8300 Network Environment
10
949
Downloaded from ManualsPrinter.com Manuals