Canon ipf8300 - Page 975

Item Details Default Setting
Primary DNS Serv-
er Address
Specify the IP address of the primary DNS server. 0.0.0.0
Secondary DNS
Server Address
Specify the IP address of the secondary DNS server. 0.0.0.0
DNS Host Name Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not use
numbers or - for the first character or - for the last character.
NB-18GBipxxxxxx
DNS Domain Name Specify the printer domain name, up to 63 characters. Use single-
byte letters, numbers, - (hyphens), and . (periods). Do not use
numbers, -, or . for the first character, or - or . for the last charac-
ter.
blank
Multicast DNS Serv-
ice Name
Specify the printer's Multicast DNS service name. (1–63 charac-
ters)
This name will be displayed when Bonjour functions are used.
Canon iPFxxxx
(xxxxxx)
7. Click OK to display the Network page.
Note
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that sup-
ports such protocol running in the network.
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this
method is used first. If you cannot obtain the IP address, the address specified in IP Address is used.
• It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend
clearing check boxes of options you will not use.
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-
ers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS
Domain Name, respectively.
When using an IPv6 IP address
1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2. Select Administrator Mode and click Logon.
3. If a password has been set on the printer, enter the password.
4. Click Network in the Device Manager menu at left to display the Network page.
5. Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IPv6 Protocol Settings page.
Network Setting
> Network Setting >
iPF8300 Configuring the Printer's TCP/IP Network Settings
10
957
Downloaded from ManualsPrinter.com Manuals