Crescent CS7010 - Maintenance and Adjustments; To Clean the Solution Filter Screen

213Service Manual – CS7010™ 30 - Solution System
Maintenance and Adjustments
CAUTION: Before performing any machine maintenance or adjustments, make sure the key switch
is off, the key is removed from the machine and the parking brake is engaged.
To Clean the Solution Filter Screen
1. Close the solution shutoff valve.
Note: Place a suitable container underneath the lter to catch any solution that may leak from the
hoses.
2. Unscrew the lter cover and remove the lter cover and screen from the
lter base.
3. Clean any accumulated dirt or debris from the screen.
4. Reinstall the screen into the lter base.
5. Make sure the rubber washer is installed correctly in the lter cover,
then reinstall and hand-tighten the lter cover.
Filter
Cover
Filter
Base
Screen
Rubber
Washer