Crescent CS7010 - Specifications

319Service Manual – CS7010™ 52 - Hopper System
Specications
Component Specications
Hydraulic Pump/Reservoir
Assembly
Displacement - 0.0321 in.
3
per revolution
CircuitType-reversible,locking
Reservoir Capacity - 45 in.
3
(26 in.
3
usable)
OilType-10W-30automotiveoil
Hydraulic Pump Motor
Voltage - 36 VDC
OutputTorque-151ft-lbs.
OutputSpeed-3669RPM(fullload)
CurrentDraw-15.9Amps(fullload)
Horsepower-0.55HP(fullload)
Dump Door Actuator
Voltage - 24 to 40 VDC
Stroke-6inches
Dynamic Load Rating - 400 lbs.
Static Load Rating - 1000 lbs.
Restraining Torque - 100 in.-lbs.
Clutch - ball detent, clutch setting: 600 to 900 lbs.
Full Load Speed - 0.55 in./sec
Current Rating - 9 Amps
TypicalCurrentDraw-1-3Amps
Proximity Sensor (Door
Extend and Retract Limit
Switches,HopperInterlock
Switch)
Air Gap:
Make-.250”(typical)
Break-.313”(typical)