Crescent CS7010 - Specifications

294Service Manual – CS7010™ 50 - Dust Control/DustGuard™ Systems
Specications
Component Specications
DustGuard Pump
Type-Diaphragmw/bypass
Nominal Voltage - 36 VDC
FlowRate-1.1GPM
Current - 1.0 Amp max.
Pressure - 30 psi max.
DustGuard Solenoid Valve
Nominal Voltage - 36 VDC, 11 Watts
CoilResistance-125Ohms±10%
Dust Control Filter
MediaType-syntheticwithUltraWeb(celluloseoptional)
Media Quantity - 120 ft
2
(approximate)
MediaConguration-PowerCore
Dust Control Vacuum Motor Current - 7 Amps average, 8 Amps max.
Dust Control Motor Contactor
(K6)
118Ohms±10%
DustControlFilterSwitch
Actuation setting ± 20%: factory set at 2” H
2
O/0.147”
Hg/0.072 psi
FilterShakerMotor
Voltage - 36 VDC
Current - 0.8 Amps average
Power-90Watts
IngressProtection-IP44
InsulationClass-B
Duty - intermittent (S2 10 min.)