252Service Manual – CS7010™ 40 - Recovery System
Maintenance and Adjustments
CAUTION: Before performing any machine maintenance or adjustments, make sure the key switch
is off, the key is removed from the machine and the parking brake is engaged.
Clean the Vacuum Filter and Filter Screen
1. Rotate the two latches 90 degrees
and remove the vacuum lter lid
assembly.
2. Remove and clean the lter and lter
screen with a vacuum, or by washing
them in warm water.
3. When the lter and lter screen are
clean and dry, reinstall them into the
recovery tank.
Note: The lter and lter screen
must be completely dry
before reinstalling.
4. Rotate the two latches back 90 degrees to
secure the vacuum lter lid assembly.
Latch (2)
Vacuum
Filter Lid
Assembly
Filter
Filter
Screen
To Next Page
Loading...