Dell PowerConnect 5324 - Page 232

232 Configuring Device Information
www.dell.com | support.dell.com
Interface — The specific port or LAG to which the static MAC address is applied.
MAC Address — The MAC address listed in the current static address list.
VLAN ID — The VLAN ID attached to the MAC Address.
VLAN Name — User-defined VLAN name.
Status — MAC address status. Possible values are:
Secure — Guarantees that a locked port MAC address is not deleted.
Permanent — The MAC address is permanent.
Delete on Reset — The MAC address is deleted when the device is reset.
Delete on Timeout — The MAC address is deleted when a timeout occurs.
Remove — When selected, removes the the MAC address from the MAC Address Table.
Adding a Static MAC Address
1 Open the Static MAC Address page .
2 Click Add .
The
Add Static MAC Address page opens.
3 Complete the fields.
4 Click Apply Changes .
The new static address is added to the
Static MAC Address Table , and the device is updated.
Modifying a Static Address in the Static MAC Address Table
1 Open the Static MAC Address page .
2 Modify the fields.
3 Click Apply Changes .
The static MAC address is modified, and the device is updated.
Removing a Static Address from the Static Address Table
1 Open the Static MAC Address page .
2 Click Show All .
The
Static MAC Address Table opens.
3 Select a table entry.
4 Select the Remove check box.
5 Click Apply Changes .
The selected static address is deleted, and the device is updated.