Configuring Device Information 239
The following is an example of the CLI commands:
console(config)# interface ethernet g1
console(config-if)# garp timer leave 900
console(config-if)# end
console# show gvrp configuration ethernet g1
GVRP Feature is currently Disabled on the device.
Maximum VLANs: 223
Port(s) GVRP- Registration Dynamic VLAN Timers (milliseconds)
Status Creation Join Leave Leave All
---------
------- -------- ------------ ------------ ------- ------
g1 Disabled Normal Enabled 200 900 10000
console#
To Next Page
Loading...
