Configuring Device Information 263
The following is an example of the CLI commands:
shutdown Disables interfaces.
set interface active {ethernet
interface | port-channel port-
channel-number }
Reactivates an interface that is shutdown due
to security reasons.
Console (config)# interface range ethernet g18-20
Console (config-if)# switchport mode access
Console (config-if)# switchport general pvid 234
Console (config-if)# switchport general allowed vlan add
1,2,5,6 tagged
Console (config-if)# switchport general ingress-filtering
disable
Table 7-67. VLAN Port CLI Commands
CLI Command Description
To Next Page
Loading...
