304 Viewing Statistics
www.dell.com | support.dell.com
Viewing Etherlike Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing etherlike statistics.
The following is an example of the CLI commands.
Table 8-81. Etherlike Statistics CLI Commands
CLI Command Description
show interfaces counters [ethernet
interface | port-channel port-channel-
number]
Displays traffic seen by the physical
interface.
Console> enable
Console# show interfaces counters ethernet g1
Port InOctets InUcastPkts InMcastPkts InBcastPkts
------- ------------- ---------------- ---------------- ------------
To Next Page
Loading...
