Bodywork Bravo-Brava
Replacing structural body panels
70.
Finishing operations
1.
Correct any distortions to the panel using a hammer and dolly block.
2.
Remove any weld slag using a disc grinder.
P4A112M01
Protections
1.
Apply the electro-phoretic protective treatment to the areas previously involved in the welding.
2.
Seal the joins between the replacement parts and the bodyshell, using IVI 854210 transparent acrylic
sealant or an equivalent product.
3. Proceed with the painting and waxing stage.
4.
Apply wax based oil protective.
116
Print no. 506.670/01
To Next Page
Loading...
