FOR-A FA-9600 Series - 11-3-6-2. If Mono Sum Selected; 11-3-6-3. If Mute; Test Selected

152
11-3-6-2. If Mono Sum Selected
Item
Default
Setting
Description
Mono Sum 1-16 L
Source Ch.1-31
(Odd channel)
Source Ch.
1-32
(*1)
Selects an audio source
channel input to each
Mono Sum L and R.
Mono Sum 1-16 R
Source Ch.2-32
(Even channel)
(*1) Channel names shown in parentheses after channel numbers indicate original audio input names.
Sec. 11-3-2. “Source Select.” See Sec. 6-9 "AUDIO DOWNMIX 1 and 2."
11-3-6-3. If Mute / Test Selected
Item
Default
Setting
Description
All Mute
Disable
Disable
Enable
Allows you to mute all output audio
channels.
Test Tone
FS 1
Off
Off
500Hz Tone
1kHz Tone
Allows you to assign an audio test signal to
the embedded audio on the FS1 SDI output.
Test Tone
FS 2
Off
Allows you to assign an audio test signal to
the embedded audio on the FS2 SDI output.
Test Tone
AES / Option
Off
Allows you to assign an audio test signal to
all AES or analog (optional) output.