78
5-46. PROCESSED SIGNAL STATUS
Simultaneous 4K/HD
Dual HD
3D-LUT (FS1)
Displays the FS1 output signal format.
Displays the FS1 output signal format.
Displays the CONV1 (converter) output signal format.
Displays the CONV2 (converter) output signal format.
(FA-96UDC required)
5-47. SDI ERROR DETECTION
Simultaneous 4K/HD
Dual HD
3D-LUT (FS1)
Displays the input signal error (TRS and CRC) count for SDI IN1-2.
To reset the count, press F1/F2 Unity.
Displays the input signal error (TRS , CRC) count for optional IN1-4.
(FA-96EX3G44-R, Slot A)
To reset the count, press each Unity button.
Displays the input or output error (TRS , CRC) count for optional SFP (RX1-4).
(FA-96SFPC, Slot A)
To reset the count, press each Unity button.
If no SFP modules are inserted into cages, āNot Installedā is displayed.