Need help?Do you have a question about the FOR-A FA-9600 Series and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Model | FA-9600 Series |
| Frame Sync | Yes |
| Color Correction | Yes |
| Proc Amp | Yes |
| Audio Embedding/De-embedding | Yes |
| Up/Down/Cross Conversion | Yes |
| HDR Support | Yes |
| Supported Formats | 3G-SDI |
| Input Interfaces | SDI, HDMI, Fiber |
| Output Interfaces | SDI, HDMI, Fiber |
| Audio Formats Supported | Analog, Embedded |
| Supported Resolutions | 1080p, 1080i, 720p |
| Fiber Type | Single Mode / Multi Mode (Option) |
| Power Supply | AC 100V-240V |
| Operating Temperature | 0 to 40 degrees Celsius |
| Storage Temperature | -20 to 60 degrees Celsius |
Safety instructions for operating the unit, including power, grounding, and general handling.
Safety instructions related to power supply and connection.
Safety instructions related to proper grounding.
Safety instructions for operating the unit under various conditions.
Safety instructions for handling and transporting the unit.
Safety guidelines for accessing internal circuitry and handling components.
Precautions regarding abnormal odors, noises, or damage.
Instructions for installing rack mount brackets and rubber feet.
Information on periodic replacement of consumable items.
Lists of items included in the FA-9600 main unit package.
Details of available hardware expansion cards and cables.
Lists available remote control units.
Lists available software options for the unit.
General introduction to the FA-9600 signal processor and its capabilities.
Highlights the main functionalities and expansion capabilities of the FA-9600.
Explains the three primary operating modes: Simultaneous 4K/HD, Dual HD, and 3D-LUT.
Details on how the unit behaves when internal temperature limits are reached.
Example connections for video input and output configurations.
Identification and description of front panel controls and indicators.
Identification and description of rear panel connectors and ports.
Information on available slots for installing optional expansion cards.
Details of the SDI I/O expansion card and its slot.
Details of the 12G-SDI output expansion card and its slot.
Description of the SFP cage card and its slot.
Details on AES/EBU audio expansion cards and their slots.
Details on the analog audio expansion card and its slot.
Details on the MADI audio expansion card and its slot.
Details on the GPI expansion cable and its slot.
Details on the GPI interface card and its slots.
Details on the LTC I/O expansion cable and its slot.
Explanation of how to operate the FA-9600 using the front panel controls.
Explanation of the icon indicating memory access and precautions.
Overview of remote control methods and connection examples.
How to load preset events for SDR to HLG color space conversions.
Details of preset events stored within the FA-9600 for color processing.
Lists preset events available on the CD-ROM for FA-96AHDR2.
Manual settings for HLG to PQ color space conversions.
References to sections detailing HD to 4K conversion settings.
How to adjust the output timing for converters.
Steps to achieve minimum delay when converting signals.
Procedures for aligning audio and video delays.
Settings for video processing amplification and adjustments.
Options for selecting split screen display modes.
Settings for the area marker function, including color and blink options.
Configuration for input and output gamma curves and color spaces.
Settings for OOTF correction when working with HLG signals.
Details on optional functions, including OOTF RGB and operation modes.
Explanation of related parameters for OOTF settings.
Controls for dynamic range, color space, and 3D-LUT conversions.
Settings for color correction in Balance (RGB) mode before color space conversion.
Settings for color correction in Balance (RGB) mode after color space conversion.
Settings for differential color correction.
Controls for RGB clipping and knee adjustments.
Controls for YCbCr clipping adjustments.
Selecting input sources for the synchronizer.
Selecting input sources for Converter 1.
Selecting input sources for the Color Processor.
Auto event loading based on input video format.
Auto event loading based on ARIB Audio mode.
Controls for adjusting dynamic range gain and SDR/HDR gain differences.
Assigning video signals to output ports.
Output signal assignment for Slot A cards.
Details on 4K SDI interface configurations and ports.
Settings for converter output format, standard, frame rate, and level.
Table showing available conversions for Converter 1.
Table showing available conversions for Converter 2.
Adjusting output timing for converters.
Settings for resizing, aspect ratio, and cropping.
Settings for I/P converter motion sense.
Enabling/disabling Anti Alias, Enhance, and Noise Reducer filters.
Settings for horizontal and vertical anti-aliasing.
Settings for horizontal and vertical enhancement.
Settings for noise reduction.
Settings for UHD upconversion.
Managing HANC and VANC data insertion.
Settings for video payload identifier insertion.
Auto event loading linked with payload identifiers.
Selecting timecode embedding for outputs.
Generating LTC timecodes.
Generating VITC/DVITC timecodes.
Selecting the LTC output source.
Managing user packets for ancillary data.
Determining which VANC data packets pass through.
Setting the synchronizer output format.
Settings for synchronizer reference and timing control.
Controls for freezing video output.
Settings for adding frame delay to outputs.
Comparison of FRAME DELAY function between FA-9600 versions.
Enabling/disabling SDI bypass routing.
Outputting selected test signals.
Displays status of input video signals.
Displays output signal formats.
Displays input signal error counts.
Displays output signal formats.
Displays Payload ID information for specific cards.
Displays payload ID codes in outputs.
Displays timecode status in SDI input and LTC IN.
Displays ARIB B39 Video Mode in SDI input ancillary data.
Displays ancillary data detected in SDI input.
Displays status of SFP modules installed on FA-96SFPC4 card.
Settings for audio de-embedding methods.
Selecting group audio clock for SDI embedding.
Enabling/disabling SDI audio embedding.
Selecting Audio Mode data insertion method.
Adjusting input audio channel polarity.
Selecting audio source channels for processing.
Settings for the sampling rate converter.
Selecting sources for mono sum channels.
Settings for audio downmix modes and levels.
Assigning audio signals to SDI and AES outputs.
Selecting HDMI audio output sources.
Selecting AES output audio sources.
Selecting analog output audio sources.
Selecting MADI output signal sources.
Settings for MADI signal output modes.
Aligning AES input channel timing by grouping.
Selecting input/output for AES terminals.
Setting AES audio input channel polarity.
Adjusting output audio gain for SDI, AES, and analog channels.
Adjusting analog audio input/output gain.
Adjusting audio channel gain for MADI output.
Adding delay to audio source channels.
Selecting FS for audio delay adjustment.
Adjusting Dolby E input timing to SDI output.
Automatically adding delay to audio output channels.
Setting signal level for analog audio input/output.
Setting polarity for analog audio input channels.
Settings for analog audio input impedance and silence detection.
Overall FA-9600 GPI settings and port assignments.
Settings for digital audio reference level and AES output.
Muting audio output channels and assigning test signals.
Settings for remote control unit, LAN, and Ember+ command acceptance.
Adjustments for LCD brightness, auto-off, LED brightness, and buzzer.
Displays FA-9600 network settings.
Configuration of FA-9600 network settings.
Setting the MU Main mode for FA-9600 operation.
Displays status of SDI embedded and HDMI audio inputs.
Displays status of AES and analog audio inputs.
Displays status of MADI audio input signals.
Displays audio timing warning and error counts.
Displays ARIB B39 Audio Mode in SDI input ancillary data.
Displays status of SDI embedded audio outputs.
Displays status of HDMI output audio channels.
Displays status of AES and analog audio outputs.
Displays status of MADI audio output signals.
Displays status of fans, power supplies, and FPGA temperatures.
Displays firmware and FPGA versions.
Displays serial number and unit name.
Displays status of installed option cards.
Lists settings not saved by event memory.
Specifies system requirements for the Windows GUI software.
Step-by-step guide for installing the Windows GUI software.
Instructions for installing the Processor Control GUI Launcher.
How to launch the Processor Control GUI Launcher.
Process for registering FA-9600 units in the launcher.
How to modify IP address and unit names.
Steps to remove a unit from the launcher list.
How to select and change MU Main modes.
Overview of video settings available in the GUI.
Selecting input sources for synchronizers in the GUI.
Settings for Converter 1 and Converter 2 in the GUI.
Adjusting delay settings for converters when selected.
Settings for resizing and aspect conversion for Converter 1.
HD/SD details, anti-alias, and enhancer settings for Converter 1.
Directional interpolation and noise reducer settings for Converter 1.
Selecting source signals for Color Processors.
Accessing detailed color processing settings.
Configuring gamma curves and color spaces for dynamic range conversion.
Adjusting dynamic range gain and SDR/HDR gain differences.
Adjusting differential color correction parameters.
Settings for pre and post-balance color correction.
Settings for RGB clipping and knee adjustments.
Adjustments for YCbCr clipping.
Other video settings like test signals and split modes.
Accessing preset event recall screen for color processing.
Managing horizontal and vertical ancillary multiplex settings.
Detailed settings for horizontal ancillary multiplex.
Settings for timecode insertion and generation.
Assigning video signals to output ports.
Adjusting timing for synchronizers and converters.
Selecting the LTC output source.
Enabling/disabling bypass or active through modes.
Selecting the reference signal source.
Checking ancillary data status in SDI input.
Displaying input and output video signal status.
Adjusting input audio clock and timing for various audio inputs.
Selecting audio source channels for processing.
Adding delay to selected audio source channels.
Settings for the sampling rate converter.
Mapping audio sources to output channels.
Controls for mono sum, downmix, mute, and test signal functions.
Downmix settings when Downmix 1 or 2 is selected.
Selecting audio sources for mono sum channels.
Assigning audio test signals or muting outputs.
Adjusting audio gain for embedded, AES, and optional outputs.
Aligning output audio and video by adjusting audio delay.
Configuring SDI embedded, HDMI, and optional audio outputs.
Settings for digital audio reference level, AES output, and error sensing.
Displays the status of audio input channels.
Displays audio timing warning and error counts.
Displays the status of audio output channels.
Configuring GPI input and output functions for slots B and C.
Configuring GPI input/output functions for slot E.
Selecting startup events and managing event linkage.
Configuring FA-9600 network settings.
Displays unit, version, option, and module status information.
Specifies system requirements for the Web GUI control.
How to connect to the FA-9600 using a web browser.
Changing FA-9600 network and SNMP settings via Web GUI.
Configuring SNMP system settings.
Enabling desired SNMP traps for status monitoring.
Importing and exporting FA-9600 settings.
Exporting and importing event data (Event 1-100).
Details on exporting and importing event data, including CSV file usage.
Automatically loading events based on input signal information.
Importing Gamma, Gamut, and 3D-LUT data.
Explains the format and editing of Gamma (.lut) and Gamut (.gmt) files.
Explains the syntax and rules for CSV files used for event data.
Example of editing event data by changing values.
Example of editing event data by changing the event name.
Setting up event tally notifications via Web GUI.
Defines the format of tally messages sent by the FA-9600.
Guide to installing and using the FA-9600 Event Editor.
Lists SNMP MIB objects for monitoring FA-9600 status.
Detailed technical specifications of the FA-9600.
Physical dimensions of the FA-9600 unit.
To Next Page