FOR-A FA-9600 Series - 12. Web GUI Setup; System Requirements for Web GUI Control; Connection to FA-9600

167
12. Web GUI Setup
◆ System Requirements for Web GUI Control
OS
Windows® 7 Professional SP1 (32/64bit)
Windows® 8.1,10 Pro (32/64bit)
Web browser
Mozilla Firefox® 24 or later
Windows® Internet Explorer 10 or later
Google Chrome 28 or later
Network port
Wired or wireless LAN connection at more than 20 Mbps
(IEEE802.3u/ab or IEEE802.11a/g/n compliant system)
Display
Resolution: 1024×768 pixels, 32-bit or better
◆ Connection to FA-9600
(1) Verify your computer is connected to the FA-9600 via wired or wireless LAN.
(2) Launch your web browser in the computer, tablet or other terminal device.
(3) Enter the FA-9600 IP address in the address bar. (The default FA-9600 IP address is
192.168.0.10.)
13. Web GUI Control
This section describes how to control the FA-9600 using a Web GUI.
When the connection to the FA-9600 is successfully established, the Unit Information screen as shown
below will appear.
13-1. Unit Information
Clicking Unit Information on the top of the page also displays this page in which FA-9600 unit
information can be found.
Power 1 and 2 in the Unit Status block are displayed if FA-96PS is installed.