FPT CURSOR Series - Page 185

SECTION 6 - GENERAL MECHANICAL OVERHAUL
37
CURSOR SERIES
Print P4D32C006 E Base - 03/2015
210306
-0.254 CLASS
1
106.300
106.307
2
106.308
106.315
3
106.316
106.323
4
106.324
106.330
210307
3
99.726
Red Red Red Red
4
99.746
Red Red Red Red
NOTE If using main half-bearings of a different thickness, fit the thicker bearings at the bottom (plate side).
210306
-0.508 CLASS
1
106.300
106.307
2
106.308
106.315
3
160.316
106.323
4
106.324
106.330
210307
3
99.472
Red Red Red Red
4
99.492
Red Red Red Red
NOTE If using main half-bearings of a different thickness, fit the thicker bearings at the bottom (plate side).