SECTION 6 - GENERAL MECHANICAL OVERHAUL
5
CURSOR SERIES
Print P4D32C006 E Base - 03/2015
ENGINE DISASSEMBLING
Disassembly of G-Drive components
Remove the protection grilles as described in the procedure
”PROTECTION GRILL REMOVAL - REFITTING” - Section 5.
Remove the radiator assembly as described in the procedure
”RADIATOR ASSEMBLY REMOVAL - REFITTING” - Section
5.
Remove the fan as described in the procedure ”FAN
REMOVAL - REFITTING” - Section 5.
Remove the air filter as described in the procedure ”AIR
FILTER REMOVAL - REFITTING” - Section 5.
Removal of radiator assembly pipes from engine
Figure 1
227773
Slacken the clamp and from the engine remove the
combustion air intake pipe (1) to the aftercooler.
Slacken the clamps and from the engine remove the coolant
intake pipe (2) to the radiator assembly.
Slacken the clamp and from the engine remove the
combustion air intake pipe (3) to the engine.
Figure 2
227774
Slacken the clamps, undo the screws (1) and from the engine
remove the fuel combustion air intake pipe to the
turbocharger (2) and bracket.
Ref.
No. Description
(1) 2 Screws M8
Removal of radiator assembly brackets
Figure 3
227775
Unscrew the fastening screws (1) of the raditor assembly
brackets (2).
Ref.
No. Description
(1) 4 M12x1.75 screws
To Next Page
Loading...
