SECTION 2 - OPERATING DIAGRAMS
15
CURSOR SERIES
Print P4D32C006 E Base - 03/2015
tightening torque
Oil filter retainer at the support base 60 ±5 Nm
Drain plug on the engine oil filter 6.5 ±1.5 Nm
Valve integrated in piston cooling nozzle
The valve allows oil to enter and thus lubrication of pistons only above the pressure value shown below.
Figure 19
109080
Technical data
Valve opening pressure 1.7 ±0.2 bar
This permits filling the circuit and therefore lubricating the most stressed parts even when working at lower pressures.
To Next Page
Loading...
