FPT CURSOR Series User Manual

- Allows prioritise protection of the environment imple-
menting all necessary precautions to protect the safety
and health of staff.
- Make sure you and all staff are fully aware of current stan-
dards for the treatment and disposal of fluids and engine
oils. Set up adequate signage and specific courses to ensu-
re a full understanding of the rules and the basic preven-
tion measures.
- Collect used oil in suitable containers with water tight
seals also providing storage in areas which are adequately
marked,ventilated, away from sources of heat and present
no fire hazard.
- Handle batteries with care in well ventilated areas and in
antacid containers. Beware of fumes coming from the bat-
teries: they may pose a serious risk of poisoning and con-
tamination of the environment.
Protection o
f
the environment
- Avoid im
p
ro
p
e
r
t
i
g
htenin
g
o
p
erations or out o
f
t
or
q
ue.
The engine’s components may be damaged also seriously,
thus prejudicing their life cycle.
- Avoid draughts from fuel tanks in copper alloy and/or pi-
pes without filters.
- Do not apply changes to the cabling, their length must not
be modified.
- Do not connect any utility to the engine’s electric equi-
pment, if not specifically approved by FPT.
- Do not modify the fuel or hydraulic systems without aut-
horisation from FPT. Any unforeseen change will void the
warranty and may prejudice the engine’s duration and life
cycle.
For engines equipped with electronic units:
- Do not carry out any arch welding without previously
removing the electronic units.
- Remove the electronic control units in case of interven-
tions in which the temperatures will exceed 80 ˚C.
- Do not paint the electronic components and connec-
tions.
- Do not modify or alter the data contained in the engine
management electronic control unit. Any manipulation or
alteration of the electronic components will invalidate the
service warranty of the engine and may also affect its ope-
ration and duration.
4
APPENDIX
CURSOR SERIES
Base - 03/2015 Print P2D32C006 E

FPT CURSOR Series Specifications

General

Engine Type	Diesel
Configuration	Inline
Aspiration	Turbocharged
Fuel System	Common Rail
Cooling System	Liquid Cooled