Tablet replenishment section
1/2
2. Replacement and adjustment of parts
27700
27700
Replacing the STB tablet conveyor motor [J]
!
!!
! Procedure
1. Remove the tablet chute and the conveyor cover.
2. Disconnect the connector(s).
J/P720: STB tablet conveyor motor
3. Remove the conveyor frame. (one screw)
4. Remove processor cover 1.
☞20020
5. Remove the drive gear. (one screw)
Tablet replenishment unit
STB tablet conveyor motor
J/P720
G050793
Conveyor frame
Processor cover 1 (inside)
G050794
Distributed by: minilablaser.com
To Next Page
Loading...