12/12
4. Troubleshooting
40500
40500
Attention message: Processor
No. 00521
Remove the prints from the sorter tray (large)
Attention message release
YES
Condition
*1. This message is not shown if Long Length Print Ejection (36inch) is set to OFF in the Processor 1 tab on the Operator Selections display.
Suffix number Condition
00000 A print whose advance length is from 457.3 mm to 914.4 mm is output to the print receiving tray (large).
*1
Distributed by: minilablaser.com
To Next Page
Loading...