10/12
4. Troubleshooting
40500
40500
Attention message: Processor
No. 00515
Set the Rack Stopper.
Attention message release
YES or automatic release
• This attention message will be automatically closed when the rack stopper is fixed.
Condition
Check Point
Diagnosis
$ Symptoms due to connection failure of wiring/symptoms resulted from blowout of fuse
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
00000 While prints are not being made, the rack stopper sensor turns off.
1 Check that the rack stopper is securely placed.
Adjustment failure point Manual No.
Failure in the attaching position adjustment of the rack stopper sensor ☞63290
Failed part Manual No.
Rack stopper sensor ☞63290
Processor I/O PCB 1 ☞66210
Processor control PCB
☞66200
Processor power supply 1 ☞67400
Symptoms due to the wiring connection failure Symptoms of fuse blowout
−
☞4203 −
Distributed by: minilablaser.com
To Next Page
Loading...