Frontier LP7700 - Basic Kit Setting [J

Processor Standard Setting
1/2
3. Mode
33520
33520
Basic Kit Setting [J]
Bringing up the display
Maintenance: 2260 → Extension → Processor Settings → Processor Standard Setting → Basic Kit Setting
!
!!
! Explanation
!
!!
! Kit Processing Amount Setting (initial value: 388.8) (input range: 0.1 to 999.9 m2)
The paper area that can be processed per kit can be set.
!
!!
! Kit Water Supply Setting (initial value: 0.01 to 327.67 L)
The water supply amount that is required per kit can be changed.
!
!!
! Drop Limit/without Replenishment Limit Setting (initial value CD: 4, BF: 8, STB: 8) (input range: 0 to
Tablets Per Cartridge)
If the tablet kit is finished, Tablet Operation will be performed. (The rest of the tablets will be dropped at once.)
A limit value for the number of tablets that can be dropped at that time can be set.
If it exceeds the setting value (Drop Limit/without Replenishment Limit Setting), the attention message 609: The Tablet kit is
empty. is shown.
!
!!
! Total Cartridge Count (initial value: 1 to 99)
The number of cartridges per kit can be set.
!
!!
! Number of tablets in the cartridge (initial value CD:40, BF:40, STB:20)
The number of tablets per cartridge can be set.
CPK-2-J2 (initial value)
PSJ-TYPE C (initial value)
CD 19.05
BF 15.55
STB 58.32
CPK-2-J2 (initial value)
PSJ-TYPE C (initial value)
CD 4
BF 10
STB 2
M5450-00
Distributed by: minilablaser.com