Frontier LP7700 - Error Message: Bravo I;CD-R External Writing System (Directly Connecting to Rimage)

Error message: Bravo I/CD-R external writing system (directly connecting to Rimage)
1/1
4. Troubleshooting
49350
49350
Error messag e: Bravo I /CD-R external writing system (directly connecti ng to R image)
No. 9350−9381
For corrective action of the error message, see the Bravo II Service Manual and the d-
Storage/ CD-R external writing system Service Manual.
Condition
NOTE
• In the Error message table, error message numbers that are not used currently may be listed.
IMPORTANT
• Error messages not explained in the Service Manual are listed in the table below.
See the Bravo II Service Manual for corrective actions of the messages.
Error (Bravo II)
IMPORTANT
• Error messages not explained in the Service Manual are listed in the table below.
For corrective action of the error message, see the d-Storage/ CD-R external writing system Service Manual.
CD-R external writing system (Directly connecting Rimage)
Error message table
No.9350 The setting file could not be read. Start by default setting.
No.9351 DLL version is incorrect.
No.9354 PTIF.DLL process response error.
No.9356 The selected order was not deleted.
No.9357 Failed to write to the CD.
No.9358 PTBurn system error.
No.9359 Tray Operation error. Press the Ink Cartridge button on the Bravo.
No.9360 The ink cartridges were not found. Open the cover of the Bravo and press the Ink Cartridge button. Make sure the
cartridges are installed.
No.9361 Bravo Internal Printer communication error. Press the Ink Cartridge button of the Bravo.
No.9362 The media was not picked. Press the Ink Cartridge button of the Bravo.
No.9363 Arm operation error. Press the Ink Cartridge button of the Bravo.
No.9364 Arm Picker error. Press the Ink Cartridge button of the Bravo.
No.9365 There are no user authorizations on the personal computer. Login as Administrator, and restart the software.
No.9366 PTBurn Internal Software error. Restart the software.
No.9367 CD-R drive for Bravo was not found. Disconnect all the cables from the Bravo (including power supply). Then reconnect
all the cables to the Bravo and restart the computer.
No.9369 The Bravo Utility was not started.
No.9370 The PTBurn was not started.
No.9371 The shared folder of PTBurn could not be accessed.
No.9373 Job history information file error.
No.9374 An error has occurred when data writing was executed on the Bravo.
No.9375 The media was not picked. Remove the media and turn ON the power supply of the Bravo.
No.9376 An error has occurred when data writing was executed on the Bravo.
Error message table
No.9350 The setting file could not be read. Start by default setting.
No.9351 DLL version is incorrect.
No.9356 The selected order was not deleted.
No.9357 Failed to write to the CD.
No.9380 Rimage CD/DVD Publishing Systems was not started.
No.9381 Failed to access the shared folder of Rimage CD/DVD Publishing Systems.
Distributed by: minilablaser.com