Frontier LP7700 - No. 06909 Cpu was Reset. Abort the Process

4/7
4. Troubleshooting
46900
46900
Error message: Main
No. 06909
CPU was reset. Abort the process.
Error message release
NO
Condition
Check Point
Diagnosis
Others
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Condition
The CPU of the printer control PCB is reset due to power failure.
Suffix number (bit) PCB
00001 Printer control PCB
1 Reset the power supply.
Failed part Manual No.
Printer control PCB
☞66000
Failed part
• If ☞No. 06909 or ☞No. 06901 occurs after replacing the printer I/F main PCB, Machine Type Registration of Machine
Specification may not be configured normally.
• For the QSS-Printer, see
☞66006.
Distributed by: minilablaser.com