2/3
3. Mode
33003
33003
Processor Settings
!
!!
! Initial Replenishment Operation (SP1)
You can remove the remaining air in the hose by operating P1R Replenisher Pump, P2RA Replenisher Pump and P2RB
Replenisher Pump for a specified time.
To cancel Initial Replenishment Operation, press NO: Cancel.
• Exhausting the air from PSR replenisher pump is performed when exhausting the air at Auto Cleaning.
• The same process can be performed as Processor Standard Setting→Processor Set Up Mode→Initial Replenisher Operation
(Replenisher Pump).
Distributed by: minilablaser.com
To Next Page
Loading...