2/2
3. Mode
33504
33504
Processor Standard Setting
!
!!
! Initial Replenisher Operation (Replenisher Pump)
• After operating P1R Replenisher Pump, P2RA Replenisher Pump and P2RB Replenisher Pump for a specified time, the air
remaining in the hose can be exhausted.
To cancel Initial Replenisher Operation (Replenisher Pump), press NO: Cancel.
• If air cannot be exhausted from hoses after performing Initial Replenisher Operation (Replenisher Pump), activate the
appropriate pumps and remove the air inside using Functions Pump Output Amount Measurement of Pump Output Amount
Setting.
S4509-00-SM03
Distributed by: minilablaser.com
To Next Page
Loading...