2/2
3. Mode
33505
33505
Processor Standard Setting
!
!!
! Waiting Time (Initial value: 90 seconds) (Input range: 90 to 999 seconds)
• The time to start advancing the Auto Setup (Test print) can be specified after the dryer temperature reached the Dryer
Temperature of Print Start Setting.
NOTE
• If the temperature already reaches the specified dryer temperature to start setup printing, printing immediately starts.
Dryer Temperature: 60°C
Counting Waiting Time (90 seconds)
After 90 seconds, printing starts.
Example: Temperature Setting (70°C), Dryer Temperature (60°C), Waiting Time (90 seconds)
Dryer temperature adjustment starts with 30°C
Example: If the dryer temperature is 30
°C
G085949
Waiting Time is not necessary.
Printing immediately starts.
Dryer temperature adjustment starts with 70°C
xample: If the dryer temperature is 70°C
G085949
Distributed by: minilablaser.com
To Next Page
Loading...