3. Mode
36005
2/2
36005
Printer Mechanical Adjustment
3. Measure the dimension between outsides of the paper guides.
4. Enter the measured value into Paper Guide Width Measurement Value.
5. Perform 130.0 mm Width Operation Confirmation via Functions and confirm that the dimension
between outsides of the paper guides is 130.0 mm.
NOTE
• The acceptable value of the dimension between the paper guides is from 129.8 mm to 130.0 mm.
Measured
value
Outside of paper guide
Outside of paper guide
Paper guides
G086490
Distributed by: minilablaser.com
To Next Page
Loading...