5/21
4. Troubleshooting
46200
46200
Error message: Printer 3
No. 06205
Setup error.
Error message release
YES
Condition
NOTE
• See the setup print judgment flow at the daily setup. ☞56620
Diagnosis
If the test print color density is normal
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
#4001 When the test print was measured, the Dmax was 3.8 or more, and the daily setup Dmax data for 15 days did not
change consecutively (the Dmax is increasing day by day)
Suffix number Countermeasure and failed part Manual No.
00001 Clean the calibration plate.
Replace the calibration plate if it is scratched on.
☞27460
Between steps
G083195
Distributed by: minilablaser.com
To Next Page
Loading...