Volume Mode
Selected reference image is sectional plane C:
The spatial position of plane C in relationship to the displayed 3D image is always a parallel plane
with a rotation of 90°. Therefore it is not possible to indicate the trace of image C by means of an
intersectional line within the 3D image.
Adjust the position of the green line within the 3D image:
Rotary control [Par. shift] enables a parallel shifting (forward/backward) of plane C.
The depth position of the image C in relationship to the Z-direction (normal to the
display) of the 3D-image is indicated by the X-axis in image A and B.
Adjust the position of image B and C with trackball:
The position of image A and B in relationship to the reference image C is determined
through the Y-axis (= intersection line for image A) and through the X-axis
(= intersection line for image B). By positioning these two axes within the reference
image C the corresponding parallel planes of A- and B-images are displayed
automatically.
Voluson
®
730Pro - Basic User Manual
11-38 105831 Rev. 0
To Next Page
Loading...
