BGS2T AT Command Set
6. Identification Commands
BGS2T_ATC_V01.301 Page 131 of 554 1/31/12
c
6. Identification Commands
The AT Commands described in this chapter allow the external application to obtain various identification infor-
mation related to the BGS2T and linked entities.
6.1 ATI Display product identification information
The ATI execute command delivers a product information text.
The "Revision" information consists of the following parts: Version xx and variant yyy of software release.
Syntax
Parameter Description
Values are not supported and only return OK.
Note
• "A-REVISION aa.bbb.cc" information consists of the following parts:
Application Revision Number 'aa' as an indication of the supported application ('01' ... no dedicated applica-
tion is present, ATC is the default application).
Application Revision Version 'bbb' as an assignment to changes in customer application.
'cc' as an additional number, e.g. defined by customer.
Exec Command
ATI
Response(s)
Cinterion
BGS2T
REVISION xx.yyy
OK
Exec Command
ATI[<value>]
Response(s)
OK
Exec Command
ATI1
Response(s)
Cinterion
BGS2T
REVISION xx.yyy
A-REVISION aa.bbb.cc
OK
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
- + + + + - - V.250
<value>
(num)
To Next Page
Loading...
Need help?
General
