BGS2T AT Command Set
16.3 AT+CPBS
BGS2T_ATC_V01.301 Page 489 of 554 1/31/12
c
16.3 AT+CPBS Select phonebook memory storage
AT+CPBS selects the active phonebook storage, i.e. the phonebook storage that all subsequent phonebook com-
mands will be operating on.
The read command returns the currently selected <storage>, the number of <used> entries and the <total>
number of entries available for this storage. The test command returns all supported <storage>s as compound
value.
Syntax
Parameter Description
“FD“ Fixed Dialing phonebook
Capacity: depending on SIM
Location: SIM
“SM“
(&F)(P)
SIM phonebook
Capacity: depending on SIM
Location: SIM
“ON“ MSISDN (Own Number) list
Capacity: depending on SIM
Location: SIM
“ME“ Mobile Equipment phonebook
Capacity: max. 250 entries
Location: ME
Test Command
AT+CPBS=?
Response(s)
+CPBS: (list of supported <storage>s)
OK
ERROR
+CME ERROR: <err>
Read Command
AT+CPBS?
Response(s)
+CPBS: <storage>, <used>, <total>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CPBS=<storage>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35]
<storage>
(str)
To Next Page
Loading...
Need help?
General
