Gemalto CINTERION BGS2T - 13.17 AT+CSMS Select Message Service

BGS2T AT Command Set
13.17 AT+CSMS
BGS2T_ATC_V01.301 Page 396 of 554 1/31/12
c
13.17 AT+CSMS Select Message Service
Syntax
Parameter Description
0
(&F)
3GPP TS 23.040 [28] and 3GPP TS 23.041 [29] (the syntax of SMS AT com-
mands is compatible with 3GPP TS 27.005 [34] Phase 2 version 4.7.0; Phase
2+ features which do not require new command syntax may be supported, e.g.
correct routing of messages with new Phase 2+ data coding schemes)
1 3GPP TS 23.040 [28] and 3GPP TS 23.041 [29] (the syntax of SMS AT com-
mands is compatible with 3GPP TS 27.005 [34] Phase 2+ version; the require-
ment of <service> setting 1 is mentioned under corresponding command
descriptions).
Mobile Terminated Messages:
0 Type not supported
1 Type supported
Mobile Originated Messages:
0 Type not supported
1 Type supported
Test Command
AT+CSMS=?
Response(s)
+CSMS: (list of supported<service>s)
OK
Read Command
AT+CSMS?
Response(s)
+CSMS: <service>, <mt>, <mo>, <bm>
OK
Write Command
AT+CSMS=<service>
Response(s)
+CSMS: <mt>, <mo>, <bm>
OK
ERROR
+CMS ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
+ + + + + - - 3GPP TS 27.005 [34]
<service>
(num)(&W)(&V)
<mt>
(num)(&V)
<mo>
(num)(&V)
Confidential / Released