BGS2T AT Command Set
7.4 ATD><mem><n>
BGS2T_ATC_V01.301 Page 141 of 554 1/31/12
c
7.4 ATD><mem><n> Mobile originated call using specific memory
and index number
Syntax
Command Description
TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
Phonebook storage:
For detailed description of storages see AT+CPBS.
“FD“ Fixed Dialing phonebook
“SM“ SIM phonebook
“ON“ MSISDN (Own Number) list
“ME“ Mobile Equipment phonebook
“LD“ Last number Dialed phonebook
“MC“ Missed (unanswered received) Calls list
“RC“ Received Calls list
“VM“ CPHS Voice Mailbox phonebook
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by AT+CPBR.
Exec Command
ATD><mem><n>[<mgsm>];
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
NO DIALTONE
When TA returns to command mode after call release:
OK
If successfully connected:
OK
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
+ + + ± ± - - V.250
<mem>
(str)
<n>
(num)
To Next Page
Loading...
Need help?
General
