BGS2T AT Command Set
15.19 AT^SSTGI
BGS2T_ATC_V01.301 Page 450 of 554 1/31/12
c
15.19 AT^SSTGI SAT Get Information - Select Item (36)
This command shall be used after receiving the URC ^SSTN: 36.
The TE is supplied with a list of items allowing the user to select one. Help can be requested by the user, if avail-
able and the presentation style is specified. In addition to text strings and icon identifiers, a next action indicator
informs the user of the likely result of selecting a chosen item.
Syntax
Parameter Description
36 Proactive command ID, see Remote-SAT Command Types
0...255 Used as bit field
bit 1 0: Presentation type is not specified
1: Presentation type is specified in bit 2
bit 2 0: Presentation as a choice of data values, if bit 1 = '1'
1: Presentation as a choice of navigation options if bit 1 is '1'
bit 3 0: No selection preference
1: Selection using soft key preferred
bit 4-7 RFU
bit 8 0: No help information available
1: Help information available
Number of items in the list
String giving menu title
Write Command
AT^SSTGI=36
Response(s)
The first line of output from the ME is:
^SSTGI: <cmdType>, <commandDetails>, <numOfItems>, <titleText>, <defaultItemId>,
<itemIconsPresent>, <itemIconsQualifier>, <titleIconQualifier>, <titleIconId>
One line follows for every item, repeated for <numOfItems>:
^SSTGI: <cmdType>, <itemId>, <itemText>, <nextActionId>, <iconId>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last
- + + + + - -
<cmdType>
(num)
<commandDetails>
(num)
<numOfItems>
(num)
<titleText>
(str)
To Next Page
Loading...
Need help?
General
