Gemalto CINTERION BGS2T - Table 15.4: State: PAC Description; Table 15.5: State: WAIT Description

BGS2T AT Command Set
15.2 Remote-SAT States
BGS2T_ATC_V01.301 Page 424 of 554 1/31/12
c
Table 15.4: State: PAC description
Table 15.5: State: WAIT description
1) To limit the time Remote-SAT is kept in states PAC or WAIT, any ongoing (but unanswered) PAC will be
aborted after 5 minutes automatically.
PAC
1
: SIM application has issued a proactive command.
This event is signalled to the TE via ^SSTN: <cmdType>.
AT command M/O/X Description
^SSTA=0,n O Enable AR Mode (with alphabet
type <n>)
^SSTA=1,n O Enable ER Mode (with alphabet
type <n>)
^SSTGI=<pac> M Show PAC information
^SSTR=<pac> X
^SSTR=<event> X
WAIT
1
: SIM application is waiting for the
response to the ongoing proactive command.
AT command M/O/X Description
^SSTA=0,n O Enable AR Mode (with alphabet
type <n>)
^SSTA=1,n O Enable ER Mode (with alphabet
type <n>)
^SSTGI=<pac> O Show PAC information
^SSTR=<pac> M
^SSTR=<event> X
Confidential / Released