Gemalto CINTERION BGS2T - 13.12 AT+CPMS Preferred SMS message storage

BGS2T AT Command Set
13.12 AT+CPMS
BGS2T_ATC_V01.301 Page 389 of 554 1/31/12
c
13.12 AT+CPMS Preferred SMS message storage
The write command selects memory storages <mem1>,<mem2>, <mem3> to be used for reading, writing, etc.
Syntax
Parameter Description
Number of messages currently in <mem1>
Number of messages currently in <mem2>
Number of messages currently in <mem3>
Number of messages storable in <mem1>
Number of messages storable in <mem2>
Number of messages storable in <mem3>
Test Command
AT+CPMS=?
Response(s)
+CPMS: (list ofsupported <mem1>s), (list of supported <mem2>s), (list of supported <mem3>s)
OK
Read Command
AT+CPMS?
Response(s)
+CPMS: <mem1>, <used1>, <total1>, <mem2>, <used2>, <total2>, <mem3>, <used3>, <total3>
OK
ERROR
+CMS ERROR: <err>
Write Command
AT+CPMS=<mem1>[, <mem2>[, <mem3>]]
Response(s)
+CPMS: <used1>, <total1>, <used2>, <total2>, <used3>, <total3>
OK
ERROR
+CMS ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
+ + + + + - - 3GPP TS 27.005 [34]
<used1>
(num)
<used2>
(num)
<used3>
(num)
<total1>
(num)
<total2>
(num)
<total3>
(num)
Confidential / Released