EasyManuals Logo

Gemalto CINTERION BGS2T User Manual

Gemalto CINTERION BGS2T
554 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
BGS2T AT Command Set
3.4 AT+CEER
BGS2T_ATC_V01.301 Page 77 of 554 1/31/12
c
Release cause for last Supplementary Service call (listed in Section 3.4.10, GSM Release cause for Supple-
mentary Service Call) or last call related use of a Supplementary Service (listed in Section 3.4.11, Proprietary
release cause for Call-related Supplementary Services (CRSS)) or release cause for supplementary services
entity or manager (listed in Section 3.4.12, Proprietary release cause for Supplementary Services Entity and
Section 3.4.13, Proprietary release cause for Supplementary Services Manager).
Examples
EXAMPLE 1
EXAMPLE 2
The user attempts to activate call barring, but uses a wrong password.
3.4.1 Cause Location ID for the extended error report
<ssRelease>
(num)
ATD"01751223344";
A mobile originated call is rejected by the remote party.
NO CARRIER
Call setup is terminated with NO CARRIER.
AT+CEER
To check the cause, the caller enters AT+CEER.
+CEER: 8,21,0
The Location ID 8 in Section 3.4.1 points to Section 3.4.7, where 21 =
"call rejected". 0 = "no error" refers to parameter <ssRelease> that is
not applicable.
OK
AT+clck=oi,1,"0000",3
+CME ERROR: incorrect password
AT+CEER
+CEER: 35,0,38
The Location ID 35 in Section 3.4.1 points to Section 3.4.10, where 38
= "negative PW check" may mean that a wrong password was tried for
the first time. 0 = "no error" refers to parameter <reason> that is not
applicable.
OK
ID Description Causes
0 no error (default) --
1 Proprietary L2 cause Section 3.4.2
2 GSM cause for L3 radio resource sublayer (3GPP TS 24.008 [32] Annex F) Section 3.4.3
3 Proprietary cause for L3 radio resource sublayer Section 3.4.4
4 GSM cause for L3 mobility management (3GPP TS 24.008 [32] Annex G) Section 3.4.5
5 Proprietary cause for L3 mobility management Section 3.4.6
6 GSM cause for L3 mobility management via MMR-SAP (3GPP TS 24.008 [32]
annex G)
--
7 Proprietary cause for L3 mobility management via MMR-SAP --
8 GSM cause for L3 call control (3GPP TS 24.008 [32] 10.5.4.11 and Annex H) Section 3.4.7
9 Proprietary cause for L3 call control Section 3.4.8
11 Proprietary cause for L3 advice of charge entity Section 3.4.9
12 GSM cause for L3 SMS CP entity --
13 Proprietary cause for L3 SMS CP entity --
14 GSM cause for L3 SMS RL entity --
15 Proprietary cause for L3 SMS RL entity --
16 GSM cause for L3 SMS TL entity --
17 Proprietary cause for L3 SMS TL entity --
Confidential / Released

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gemalto CINTERION BGS2T and is the answer not in the manual?

Gemalto CINTERION BGS2T Specifications

General IconGeneral
BrandGemalto
ModelCINTERION BGS2T
CategoryTouch terminals
LanguageEnglish

Related product manuals