Gemalto CINTERION BGS2T - 9.5 AT+CCUG Closed User Group

BGS2T AT Command Set
9.5 AT+CCUG
BGS2T_ATC_V01.301 Page 216 of 554 1/31/12
c
9.5 AT+CCUG Closed User Group
The AT+CCUG write command serves to activate or deactivate the explicit CUG invocation, to set the desired
index, and to specify if Preferential Group or Outgoing Access shall be suppressed.
The AT+CCUG read command returns if the Explicit CUG invocation is activated (in parameter <n>), which CUG
<index> is chosen, and if Preferential Group or Outgoing Access is suppressed (in parameter <info>).
Syntax
Parameter Description
Explicit CUG invocation options
0
(D)
Deactivate explicit CUG invocation
1 Activate explicit CUG invocation
0-9 Explicit selection of CUG index
10
(D)
No index (preferred CUG taken from subscriber data)
state of the call
0
(D)
No information
Test Command
AT+CCUG=?
Response(s)
list of supported <n>, range of supported <index>, range of supported <info>
OK
ERROR
+CME ERROR: <err>
Read Command
AT+CCUG?
Response(s)
+CCUG:<n>, <index>, <info>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CCUG=[[<n>][, <index>][, <info>]]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35],
3GPP TS 22.085 [24],
3GPP TS 24.085
<n>
(num)
<index>
(num)
<info>
(num)
Confidential / Released