BGS2T AT Command Set
8. Network Service Commands
BGS2T_ATC_V01.301 Page 176 of 554 1/31/12
c
8. Network Service Commands
The AT Commands described in this chapter are related to various network services. More commands related
to this area can be found in Chapter 9., Supplementary Service Commands.
8.1 AT+COPN Read operator names
The AT+COPN command returns the list of operator names from the ME. Each operator code <numericn> that
has an alphanumeric equivalent <alphan> in the ME memory is returned. See also: AT^SPLM.
Syntax
Parameter Description
Operator in numeric format; GSM location area identification number.
Operator in long alphanumeric format; can contain up to 16 characters.
Test Command
AT+COPN=?
Response(s)
OK
ERROR
+CME ERROR: <err>
Exec Command
AT+COPN
Response(s)
+COPN: <numericn>, <alphan>
[+COPN: ...]
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35]
<numericn>
(str)
<alphan>
(str)
To Next Page
Loading...
Need help?
General
